Skip to content

Gas Leak Detection Bolwarra Heights

Gas leak detection in Bolwarra Heights finds where the smell is coming from, makes the line safe and repairs it for one fixed price. A licensed gas fitter follows the pipe with a gas detector, replaces the failed part and pressure tests the run before anything relights.

Leaks only on this page. New connections and other gas work are on the gas fitting hub page, and a plumber in Bolwarra Heights covers the rest of the house from the home page.

Licensed plumbers and gas fitters · NSW Lic. 359278C

Last updated September 2026

Gas fitter at work on a kitchen oven

How Do You Know It's Gas?

A gas escape gives itself away before it turns dangerous, and you can check for these without touching anything:

  • The sulphur smell of gas, heaviest beside the meter or a gas appliance
  • Hissing from gas pipework while every appliance is switched off
  • Burners that used to show blue now showing yellow or orange tips
  • A strip of dead lawn or garden sitting over a buried gas line
  • A gas bill that climbs while your cooking and heating habits stay the same

Each of these is worth a detector trace.

Gas cooktop burner alight
Plumber beside a newly installed continuous-flow gas hot water unit

Safety First, Before Anything Else

With a strong smell indoors, safety comes before the repair:

  1. 1

    Get people and pets outside.

  2. 2

    Don't flick switches or pull plugs on the way out.

  3. 3

    Only turn the meter tap off if it is right beside your exit.

  4. 4

    Phone the gas network's emergency line for a strong smell, then phone us to trace and fix it.

The emergency line deals with the street supply. From the meter to your appliances is private pipework, and that is where we trace and repair.

How We Find and Fix It

The trace runs in a set order so nothing gets missed:

  1. 01

    Isolate

    The supply is cut so the system can be tested rather than guessed at.

  2. 02

    Detect

    The gas detector works along the line, from the meter through every branch, and marks the exact point of the escape.

  3. 03

    Repair

    The failed pipe, fitting or connection gets swapped out, whether it sits under the floor, in a wall or out at the BBQ point.

  4. 04

    Test and certify

    The whole run is pressure tested, the appliance is checked at the connection, and you get the compliance paperwork for the work.

What Shapes the Repair Price?

The quote depends on:

  • How hard the leak is to get at, since a weeping fitting at the meter is quick while a joint inside a brick cavity means opening the wall
  • How much pipe and how many fittings have to be replaced
  • Whether other appliances on the same run need retesting and reconnecting
  • When the trace happens, because a night-time gas call is charged at a higher rate

The number is agreed first, and no tool comes out until you say yes.

Estate Gas Runs and the Ground Under Them

Different builders, different standards

Homes here were built release by release from the 1980s, each by a different set of volume builders, so the builder shortcut fittings behind the plaster range from sound to barely clipped. One house can be sound while the one next door is not.

Clay that shifts under the pipe

Reactive clay soil expands with rain and contracts through dry spells, and on sloping blocks that movement strains buried gas lines and their joints over the years. A leak can start at a joint that was tight when it was laid.

From a Customer With an Urgent Gas Job

"We had an urgent gas problem that required immediate attention at our home…on a Friday afternoon. … Identified the issue, fixed and tested" Lee

Call (02) 4915 2998

When We're Not the Right Call

Gas escaping from the meter body or the street main belongs to the gas distributor, and their emergency line sends a crew for it. We take over from the outlet of the meter onward.

What Happens When You Call

  1. 01

    Ring or send the form

    Call (02) 4915 2998 or use the form to explain the fault. We ask enough to bring the right equipment the first time.

  2. 02

    A fixed price first

    A plumber inspects the job and names a fixed figure up front. Nothing gets started until you give the go-ahead.

  3. 03

    Trace, repair, test

    The detector pins the escape, the failed fitting is replaced, and the line holds a pressure test before gas flows again.

  4. 04

    Covered for a year

    Every job carries our 365-day warranty on all work. If something we did isn't right, ring the same number.

Questions Before You Ring

Do you come out after hours for a gas leak in Bolwarra Heights?

Yes. We are Available 24/7, and a gas smell is treated as urgent whatever the time. Walk everyone out first, shut the meter valve only if it is right on your path, then phone so the trace can begin.

Does the repair come with paperwork?

Yes. Once the leak is repaired the line is pressure tested, and you receive the compliance documentation for the gas work. It is the proof a licensed gas fitter signed off on the job.

Can a leak hide in pipework behind a wall on an older estate home here?

It can. Gas pipe that an early estate builder clipped poorly can sit in a wall void or beneath the floor, so a detector trace is the reliable way to pinpoint them before any wall is opened.

Do you check the appliances as well as the lines?

Yes. The trace covers the pipe and every connection point, and each appliance is run and checked at the end. If the fault is in the appliance's own parts and not the pipe, its service agent handles it.

For a new appliance rather than a leak, see gas appliance connections; gas hot water systems are on the hot water hub.

Need a plumber? Call or send the form

Call (02) 4915 2998 or send the form below. Available 24/7, you see a fixed figure ahead of any work, and every job carries our 365-day warranty on all work.

Call (02) 4915 2998

Request a callback

Leave a name and number and a plumber will ring you back.

We use your details only to call you back about this job. See our privacy policy.

Call (02) 4915 2998 Get a quote